Splined half-coupling or splined coupling for hydraulic pumps & motors- OCGF hydraulic

⁠

Splined half-coupling

The splined coupling or splined half-coupling with internal or external teeth have the function of mechanically connecting, for example, a hydraulic pump group 2 or group 3 with a multiplier. The fluted sleeve is widely used in the agricultural world with the PTO and a hydraulic pump. They can be fixed on hydraulic motors for agricultural and TP tractors. The groove makes it possible to go from a high power to a relatively low speed. There is also the splined sleeve in mechanical clutches coupled to hydraulic pumps. This economical solution remains reliable and requires very little maintenance.

Splined Hubs

⁠

The SPLINED HALF-COUPLING proposed by OCGF have an internal toothing and a smooth exterior. Splined hub is a part of the drive shaft and they are made of quality materials. These fittings made of steel are very resistant. We offer them in several different versions and can all withstand great pressure :

• Splined coupling 08 tooth
• Splined coupling 32 tooth
• Splined half-coupling 29 tooth
• 21 tooth internal splined coupling sleeve
• 23 tooth internal splined bush
• Internal splined hub 27 tooth
• Splined Hubs 20 tooth
• Internal splined hub 18 tooth
• Internal 16 teeth splined bush
• Internal splined hub 14 tooth
• Internal grooved bush 15 tooth• Splined sleeve inside 16 tooth outside 24 teeth
• ...

If the product you are looking for is not available, simply call us on 0033 (0) 240312842 and we will assist you.